A Guide to an Adventure-Ready Hunter Cub: HONDA CT125 HUNTER Cub(Trail125) Custom

Webike's Opinion

Here is a "HONDA CT125 HUNTER Cub(Trail125)" custom by Webike community user "Kabuto Ebi". The SP TADAO PURE SPORT S Full Exhaust System offers a comfortable, flat torque curve that doesn't tire you even on long trips. Even with a large rear rack filled with outdoor equipment, it can handle tough rides. The sound is satisfying with its deep tone, yet not excessively loud. In terms of performance, you can clearly feel an increase in torque at mid to low speeds during the ride. The ZETA Magnetic Drain Bolt features a powerful magnet at the tip that collects minute iron particles present in the engine oil. Since the CT125 has several bolts around the drain bolt area, a blue color has been chosen as a marker to prevent confusion during an oil change. It stands out even in dark environments, making it easy to locate the exact bolt. The ability to check the condition of iron particles inside the engine each time the oil is changed provides peace of mind. The DID SUPER Non-Seal Chain 428NZ turns smoothly. The outer part is gold, making it visually glamorous and giving an uplifting feeling that motivates you to the extent that you feel excited about the replacement. The most important thing is that the push/pull of the bike becomes lighter, and of course it also has a positive effect on riding. The ZETA Adventure Armor Handguard is highly rigid and capable of enduring off-road performance. The guard looks great on its own, but you can also easily add any of the Armor Handguard Protector series with bolt-on installation. This time, the ZETA Handlebar Cover was installed to reduce the coldness of hands during the winter season. It comes with upper and lower angle adjustment functions to avoid interference with the exterior, tank, and back of the hand. The effectiveness of wind protection in winter is excellent. The stock handlebar is empty in the center, making it feel lonely. To address this, the ZETA Adjustable Mounting Bar has been added. The full flat design maximizes the use of mounting space. The length can be adjusted in 5 steps by using the special spacer, which is convenient for the CT125 since it is difficult to mount a smartphone holder on the stock handlebar. With the stock side stand, when a larger load is placed in the cargo area, there is a possibility that the front tire may lift up and the bike could fall over on the side stand side. To address this issue, the ENDURANCE Reinforced Side Stand Bracket is installed. The mounting position is lowered by about 2cm, and the side stand moves back by approximately 10cm, providing a much greater sense of stability. If you're customizing your CT125, it is highly recommended to install this first for added stability.

Gallery

Specifications