Die-cast aluminum body and classy carbon look! New mirror series from KIJIMA!

TECH Mirror combining superior convenience and impact toughness

KIJIMA, a manufacturer of custom motorcycle parts and equipment, has developed the TECH Mirror Series. The die-cast aluminum body with excellent impact toughness and a plain weave real carbon matte plate on the back give the mirror a high-class appearance. Even with its unique design, it matches with the look of a wide range of models without looking out of place, and it can be expected to reduce weight and increase strength. Two types of mirror shapes (Oval Edge and Round), long and short shaft lengths, and bar-end types are available, allowing you to choose according to your own preference. Please note that some vehicles require a separate impact mitigation device.

TECH11 Mirror Oval Edge / TECH12 Mirror Round

This universal mirror comes with 8mm and 10mm right/left-hand screws for attachment, making it compatible with a wide range of models. Two types of designs, TECH11 Oval Edge and TECH12 Round, are available, with a choice of long or short shaft lengths.

TECH11 Mirror Oval Edge

Price (including tax): 12,650 JPY
Type: Long (203-8091), Short (203-8090)
Shaft length: 168mm (long), 138mm (short)
Mirror size: 78 x 118mm
Color: Black/Carbon
Includes: 1 mirror (can be used for right or left side), M10 right-handed screw / M10 left-handed screw, M8 right-handed screw / M8 left-handed screw, mirror hole plug

TECH12 Mirror Round

Price (including tax): 12,650 JPY
Type: Long (203-8093), Short (203-8092)
Shaft length: 168mm (long), 138mm (short)
Mirror size: 94 x 94mm
Color: Black/Carbon
Includes: 1 mirror (can be used for right or left side), M10 right-handed screw / M10 left-handed screw, M8 right-handed screw / M8 left-handed screw, mirror hole plug

Stylish Thin Mirror

Surprisingly thin (mirror surface 4.8mm), yet designed to maintain strength.

Flexible Range of Motion

The shaft, shaped to dissipate wind pressure at high speeds as much as possible, can be flexibly adjusted by approximately 120 degrees.

Luxurious Appearance

The composite specification of die-cast aluminum body and flat weave glossy carbon plate creates a high-class and solid impression.

TECH11/12 Bar-end Mirror

TECH Series bar-end mirror type. Since the mirror is mounted using the included bar-end, there is little interference with the stock parts of the handlebars, allowing for easy installation. Two designs are available: Oval Edge and Round.

TECH11 Bar-end Mirror / TECH12 Bar-end Mirror
Price (including tax): 11,000 JPY
Type: TECH11 Oval Edge (203-8094), TECH12 Round (203-8095)
Mirror size: 78 x 118mm (TECH11), 94 x 94mm (TECH12)
Shaft length: 120mm
Color: Black/Carbon
Compatibility: Inserted in the pipe of standard handlebars and inch handlebars, or attached with M6 bolts
Includes: 1 mirror (can be used for right or left side), spacer (large, medium, small), bar-end, taper nut

Original Source

Provided by KIJIMA