Hot stock accessories for the CT125 Hunter Cub!

The CT125 Hunter Cub model launched last year was equipped with a new engine and the model number was changed from 2BJ-JA55 to 8BJ-JA65 accordingly. The planned sales volume was 14,000 units (per year in Japan), which is 1.75 times that of the previous generation! (The planned Japan sales volume for 2020 was only 8,000 units.) You can tell that Honda was quite enthusiastic about this model and they also put a lot of work into the stock accessories for this JA65 CT125 as well!

Honda Stock Accessories

Front Rack & Windshield

For the previous model, this rack was sold under the H2C brand, an accessory brand of A.P. Honda (Thailand), but did not exist as a stock accessory in Japan. However, it was clear that there was a lot of demand for it, so many aftermarket makers have released various types of front racks. But now it is available as a Honda stock accessory! Moreover, you can attach a windshield, what could be better!?

Side Box & Bracket

A hard side box with a capacity of approximately 8 liters. By mounting it under the rear rack, the width of the bike stays the same so as not to compromise mobility. It has a two-compartment structure, with a pocket in the lower part for storing thin items.

External dimensions: Approx. 306mm (length) x 293mm (width) x 172mm (depth) *not including mounting area
Internal dimensions: [Upper part] Approx. 187mm (length) x 205mm (width) x 135mm (depth), [Lower part] Approx. 187mm (length) x 205mm (width) x 135mm (depth)

Folding Shift & Brake Pedals

These pedals are foldable, just like on hardcore off-road bikes. Not only for dress-up purposes, the pedals will not easily be damaged in the event of a fall.

Material: Steel
Surface treatment: Zinc plating
*Shift pedal and brake pedal sold separately.

Rally Step

This step is specially designed based on the CRF450R. Although the spike shape increases aggression to the sole of the boot, the wide off-road design by far improves stability and control when riding off-road. As is often the case with exclusive designs, the bank sensor is set in the stock position for safety.

Material: Stainless steel
Surface treatment: Cationic electrodeposition coating
Color: Black
*Set of left and right

Center Rack

A center rack is what every Cub owner needs! The basic structure is made of 12.7mm pipe, and 8mm rods are added for a very sturdy overall structure. It is not likely to break due to rusting, which is common with cheaper products.

Material: Steel
Surface treatment: Coating (Primer: Cationic electrodeposition coating)
Color: Black
Allowable load weight: 1.0kg